ClickCease
BOOK ONLINE HERE & SAVE 10%
Frigidaire Washer Error Code E59

Frigidaire Washer Error Code E59

If your Frigidaire washer is displaying Error Code E59, it indicates a lack of tachometer signal for a duration of 3 seconds.

Follow these detailed steps to diagnose and resolve the issue:

  1. Unplug the Washer: Begin by disconnecting the washer from the power source to ensure safety during the diagnostic process.
  2. Tachometer Resistance Check:
    • Locate the motor and identify the tachometer. Check the resistance through the tachometer on the motor.
    • The resistance should fall within the range of 105 to 130 ohms. If it deviates from this range, there may be an issue with the tachometer.
  3. Drive Motor Inspection:
    • If the tachometer has failed, it is recommended to replace the entire drive motor.
    • Remove the drive belt and spin the motor pulley. If the pulley encounters resistance or fails to spin freely, replace the drive motor.
  4. Spin Bearing Examination:
    • Rotate the large drive pulley on the back of the washer tub to inspect the spin bearing.
    • If the pulley does not spin freely, it may indicate a need for replacement of the outer tub and spin basket.
  5. Motor Windings Resistance Check:
    • Check the resistance of the motor windings for a reading between 4 and 6 ohms. If the reading is outside this range, the motor may be faulty and requires replacement.
  6. Speed Control Board Evaluation:
    • If the motor is in proper working condition, the speed control board should be examined.
    • Typically, if the motor is sound but the issue persists, the speed control board might need replacement.

Following these systematic steps will help you identify and address the root cause of Frigidaire Washer Error Code E59. Should you encounter any challenges or require professional assistance, don’t hesitate to reach out to our experts for further guidance.