ClickCease
BOOK ONLINE HERE & SAVE 10%
Frigidaire Washer Error Code E48

Frigidaire Washer Error Code E48

If your Frigidaire washer is displaying Error Code E48, it indicates that the control system has detected an issue with the door lock circuit.

Here’s a step-by-step guide to help you troubleshoot and resolve this error:

  1. Safety First: Unplug the Washer Before attempting any troubleshooting, ensure the safety of the process by unplugging the washer from the power source.
  2. Inspect the Wiring Harness:
    • Carefully examine the wiring harness connected to the door lock assembly. Look for any visible signs of damage, such as frayed wires or loose connections.
    • If you find any issues with the wiring, address them by repairing or replacing the damaged sections.
  3. Check for Continuity:
    • Utilize a multimeter to check the continuity of the wiring harness. This helps identify any hidden internal wiring problems.
    • If the wiring harness proves to be in good condition with consistent continuity, the focus shifts to the door lock/switch assembly.
  4. Door Lock/Switch Assembly Inspection:
    • The door lock/switch assembly is a critical component. If the wiring checks out, it’s likely that this assembly is malfunctioning.
    • Remove the door lock/switch assembly and inspect it for any visible damage or signs of wear.
    • If there are no apparent issues, further testing using a multimeter may be necessary to confirm its functionality.
  5. Replacement of Door Lock/Switch Assembly:
    • If the door lock/switch assembly is deemed faulty through testing, it’s recommended to replace it.
    • Obtain a compatible replacement part and install it carefully, following the manufacturer’s instructions.
  6. Reconnect and Test:
    • After addressing the identified issues, reconnect the wiring harness and the new door lock/switch assembly.
    • Plug the washer back in and run a test cycle to ensure that the error has been successfully resolved.

Remember, while this guide provides a systematic approach to troubleshooting Frigidaire Washer Error Code E48, it’s crucial to refer to your appliance’s user manual for specific instructions and safety precautions. If you encounter challenges or are unsure about any step, seeking professional assistance is recommended.