ClickCease
BOOK ONLINE HERE & SAVE 10%
Frigidaire Washer Error Code E13

Frigidaire Washer Error Code E13

Error Code E13 on your Frigidaire washer indicates a potential water leak in the tub or an air leak in the water level pressure sensor air hose.

Here’s a step-by-step guide to help you diagnose and resolve this issue:

  1. Drain the Washer:

    • Begin by draining the water out of the washer.
    • Ensure the washer is unplugged for safety during inspection and repairs.
  2. Inspect the Outer Tub:

    • Thoroughly check the outer tub for any cracks or visible leaks.
    • Look for water dripping from the bottom of the washer tub or any connected hoses.
  3. Address Tub Leaks:

    • If you identify leaks in the tub, consider replacing the tub to eliminate the issue.
    • A cracked or compromised tub can contribute to water leakage.
  4. Examine Hoses:

    • Inspect all hoses connected to the washer for signs of damage or leaks.
    • Pay close attention to hoses that may be dripping water.
  5. Focus on Air Hose:

    • Check the water level pressure sensor air hose for potential air leaks.
    • If you notice any leaks, promptly replace the air hose to restore a proper seal.
  6. Assess Sensor Functionality:

    • If no water leaks are found and the air hose is intact, turn your attention to the water level pressure sensor.
    • Replace the water level pressure sensor if it’s determined to be malfunctioning.
    • The sensor may need replacement if it fails to accurately detect the water level in the washer.

By following these steps, you can systematically identify and address the root cause of Frigidaire Washer Error Code E13. Regular maintenance and prompt resolution of such issues contribute to the optimal performance and longevity of your washer. If uncertainties persist, seeking professional assistance is advisable for a thorough diagnosis and effective solutions.