ClickCease
BOOK ONLINE HERE & SAVE 10%
Frigidaire Dishwasher Error Code PF

Frigidaire Dishwasher Error Code PF

If your Frigidaire dishwasher displays the error code PF, it is signaling a power failure within the appliance. This code triggers when there is a significant drop of 10% or more in power, indicating a disruption in the normal electrical supply.

Troubleshooting Steps:

  1. Check Voltage Supply: Begin by ensuring that the voltage supplied to the dishwasher is sufficient for its proper operation. A drop in power could result from electrical fluctuations or issues with the power source. Confirm that the dishwasher is receiving the required voltage to function optimally.
  2. Reset the Dishwasher: If the voltage is confirmed to be adequate, the next step is to perform a reset. This can be done by either turning off the power to the dishwasher for a duration of five minutes or by pressing the cancel button until the error code clears.

Detailed Instructions:

a. Verify Power Source: – Inspect the power outlet and ensure it is functioning correctly. – Check for any loose or damaged power cords. – Confirm that there are no issues with the circuit breaker or fuse related to the dishwasher.

b. Voltage Check: – Utilize a multimeter to measure the voltage supplied to the dishwasher. – Ensure the voltage matches the specified requirements in the dishwasher’s manual.

c. Resetting the Dishwasher: – Turn off the power supply to the dishwasher using the circuit breaker or by unplugging it. – Wait for at least five minutes to allow the dishwasher’s internal systems to reset. – Alternatively, press the cancel button on the dishwasher’s control panel until the error code disappears.

Final Checks:

After performing these troubleshooting steps, power the dishwasher back on and run a short cycle to confirm that the error code PF has been successfully resolved. If the issue persists, it may be advisable to consult the dishwasher’s manual for additional guidance or seek professional assistance for a thorough inspection.

By following these detailed steps, you can effectively address the Frigidaire Dishwasher Error Code PF and restore your appliance to its normal functioning state.